Installation Guides

Step-by-step instructions for applying your Gorilla Graphics skins perfectly.

PS5

PS5 Skin Installation Guide

Clean your console - Use the microfibre cloth to thoroughly clean the surface of your PS5. Ensure no dust or oils remain.
Peel the skin - Carefully peel the skin from the backing paper. Start from one corner.
Align the skin - Position the skin on your console. The air release technology allows you to reposition if needed.
Apply pressure - Use the squeegee to press the skin firmly onto the console, starting from the centre and working outward.
Remove bubbles - If any bubbles appear, gently push them to the edges with the squeegee.
Repeat for controller skins - Follow the same process for both controller skins.
Enjoy! - Your custom PS5 is ready to show off.

Clean the machine - Wipe down all surfaces with the microfibre cloth.
Start with the body - Peel and align the main body skin first. Use the squeegee to smooth it out.
Apply the drip tray skin - Carefully position the drip tray skin and surround.
Apply the faucet skin - The faucet body skin requires careful alignment around the tap.
Add the handle decals - These small decals add the finishing touch.
Let it set - Allow the vinyl to cure for 24 hours before heavy use.

Prepare the surface - Clean all areas thoroughly with the microfibre cloth.
Apply the main body - Start with the exterior body skin. Take your time to get the alignment right.
Apply the interior skin - Carefully position the interior skin inside the machine.
Apply the drip tray - Position the drip tray skin and surround for a seamless look.
Smooth out bubbles - Use the squeegee to remove any air bubbles.

SUB

Clean the machine - Thoroughly clean all surfaces with the microfibre cloth.
Apply the body skin - Carefully apply the main body skin, using the squeegee to smooth it out.
Apply front and back panels - These panels complete the main look of your Sub machine.
Apply the faucet skin - The faucet skin adds a coordinated finish.
Final smoothing - Go over all surfaces with the squeegee to ensure full adhesion.

Always clean the surface thoroughly with the included microfibre cloth. Any dust or oils will affect the adhesion of the vinyl.

Vinyl is more flexible and easier to apply in a warm environment (20-25°C). Cold vinyl is less pliable and can crack.

Don't rush the application. Our air release technology allows you to reposition, so take your time to get the alignment perfect.

For curved surfaces, gently warm the vinyl with a hairdryer to make it more pliable and easier to stretch around corners.

Allow the vinyl to cure for 24 hours before heavy use or cleaning. This ensures the adhesive has fully bonded with the surface.

If you're having trouble with your installation, our team is here to help.